|
|
Air Springs, Shocks, Solenoids, & Compressor
 |
Everything you need to replace the air suspension components. When we remanufacture the air spring. We utilize the original top and bottom. We have found that the composition of the plastic that is originally produced by Firestone is much more durable than any other. We replace the original air bladder with a new air bladder that has been produced directly for Suncore Industries by Good Year. We provide installation instructions with your purchase. We are always available for any technical assistance needed. The air spring comes with o-rings. A large o-ring to go between the solenoid and the upper air spring assembly. 2 o-rings for your solenoid, and 1 small o-ring for the air inlet valve on the solenoid. The Compressor is completely remanufactured to O.E.M. performance standards. The shocks are brand new Monroe shocks.
|
 |
|
|
| |
Conversion Kit with Rear Shocks
|
This includes 2 Coils and 2 Rear Shocks. Your Crown Victoria will ride like new after installing our Coils and Shocks.!
|
 |
|
|
|
Full Air Suspension Replacement
|
This includes 2 Rear Air Springs, 1 Compressor with dryer, and 2 solenoids. Your Crown Victoria will ride like new after installing our Full Air Suspension.
|
|
|
|
|
Rear Conversion Kit
|
Our coil spring conversion kit is designed to replace the air ride system with a quality coil spring system. The kit comes with instructions, also there are instructions for turning out the ride control light on the dash. Our kit is designed to give you a smooth ride at the correct ride height.
|
|
|
|
|
Rear Conversion Kit Heavy Duty
|
Our coil spring conversion kit is designed to replace the air ride system with a quality coil spring system. The kit comes with instructions, also there are instructions for turning out the ride control light on the dash. Our kit is designed to give you a smooth ride at the correct ride height.
|
|
|
|
| |
Front Shocks NEW
|
We strongly recommend you replace the front shocks every 50,000 miles.
|
|
|
|
| |
Rear Shocks ( Sold Pair Only ) NEW
|
We strongly recommend you replace the rear shocks when you convert the suspension to coil springs.
|
|
|
|
| |
Rear Air Spring
|
When we remanufacture the Crown Victoria air spring. We utilize the original top and bottom. We have found that the composition of the plastic that is originally produced by Firestone is much more durable than any other. We replace the original air bladder with a new air bladder that has been produced directly for Suncore Industries by Good Year. We provide installation instructions with your purchase. We are always available for any technical assistance needed. The air spring comes with o-rings. A large o-ring to go between the solenoid and the upper air spring assembly. 2 o-rings for your solenoid, and 1 small o-ring for the air inlet valve on the solenoid. |
|
|
|
| |
Suspension Control Module Limited Quantities Available
|
This is a brand new OEM Replacement Suspension Control Module. This item is Non-Returnable.
|
|
|
|
| |
Height Sensor Limited Quantities Available
|
This is a brand new OEM Replacement Height Sensor.
This item is Non-Returnable.
|
|
|
|
| |
Compressor "Dryer Included."
|
The Compressor is completely disassembled and all the high wear components are replaced. The Compressor is tested and inspected many times before leaving our factory.
|
|
|
|
| |
Dryer
|
The dryers are disassembled and recharged with new moisture adsorbing desiccant. The worn and rusty components are reconditioned or replaced.
|
|
|
|
| |
SOLENOID ( Rebuilt )
|
Air spring solenoid includes new o-rings.
|
|
|
|
| |
O-RING KIT
|
Kit includes all the o-rings for 2 solenoids 8 total.
|
|
|
|
.jpg)
