|
|
|
|
Everything you need to replace the Crown Victoria Suspension components. When we remanufacture the Crown Victoria Suspension air spring. We utilize the original top and bottom. We have found that the composition of the plastic that is originally produced by Firestone is much more durable than any other. We replace the original air bladder with a new air bladder that has been produced directly for Suncore Industries by Good Year. We provide installation instructions with your purchase. The air spring comes with o-rings. A large o-ring to go between the solenoid and the upper air spring assembly. 2 o-rings for your solenoid, and 1 small o-ring for the air inlet valve on the solenoid. The Compressor is completely remanufactured to O.E.M. performance standards. The Crown Victoria Shocks are brand new shocks.
|
 |
|
| |
|
This Crown Victoria Suspension kit includes 2 Coils and 2 Rear Shocks. Your Crown Victoria Conversion kits and Crown Victoria Shocks will ride like new after installing our Coils and Shocks.!
|
|
|
| |
|
When we remanufacture the Crown Victoria Suspension air spring. We utilize the original top and bottom. We have found that the composition of the plastic that is originally produced by Firestone is much more durable than any other. We replace the original air bladder with a new air bladder that has been produced directly for Suncore Industries by Good Year. We provide installation instructions with your purchase. The Crown Victoria Suspension air spring comes with o-rings. A large o-ring to go between the solenoid and the upper air spring assembly. 2 o-rings for your solenoid, and 1 small o-ring for the air inlet valve on the solenoid.
Air Bellow produced directly for Suncore Industries by Good Year
|
|
|
|
|
Our coil spring conversion kit is designed to replace the air ride system with a quality coil spring system. The Crown Victoria Conversion kits comes with instructions, also there are instructions for turning out the ride control light on the dash. Our Crown Victoria Suspension Conversion kit is designed to give you a smooth ride at the correct ride height. If You need to tow or carry any extra weight in the trunk get the Heavy Duty Crown Victoria Conversion Kit To keep it leveled.
|
|
|
|
|
This Crown Victoria Suspension Kit includes 2 Rear Air Springs, 1 Compressor with dryer, and 2 solenoids. Your Crown Victoria Suspension will ride like new after installing our Full Air Suspension.
|
|
|
click image for details
|
Ford Crown Victoria 1983-2006 Air Lift Suspension Parts
|
Adjustable air helper springs | The load and towing problem solver
Air adjustability is the difference! Stiff steel factory suspensions must compromise between ride comfort and load hauling capacity. Smooth ride suspensions can’t carry heavy loads; heavy springs ride rough, especially when the vehicle is unloaded. Air Lift adjustable air springs solve these problems by allowing you to tune your suspension under all load and road conditions. Just add air when towing or hauling and then remove air for a softer ride when unloaded.
Go To: Ford Crown Victoria 1983-2006 Air Lift Catalog
|
 |
|
| |
|
The Crown Victoria Suspension Compressor is completely disassembled and all the high wear components are replaced. The Compressor is tested and inspected many times before leaving our factory.
|
|
|
| |
|
We recommend you replace the front Crown Victoria Shocks every 50,000 miles. The 1989-2002 is sold in pairs For $59.00, and The 2003-2008 is sold individually and they are $89.00 each.
|
|
|
| |
|
This is a brand new OEM Replacement Crown Victoria Suspension Control Module.
This item is Non-Returnable.
|
 |
|
| |
|
The Crown Victoria Suspension Compressor Relay Supplies Power to the Compressor. When the Compressor Overheats it can cause damage to the Relay and need replacement.
|
|
|
| |
|
The Crown Victoria Suspension dryers are disassembled and recharged with new moisture absorbing desiccant. The worn and rusty components are reconditioned or replaced.
|
|
|
| |
Ford Crown Victoria 1989-2008 Suspension Compressor Vibration Isolator Kit
|
This Brand New Ford Compressor Rubber Vibration Isolator kit absorbs the vibration from your air suspension compressor and gets Rid of The Vibration Noise. This Kit includes 3 New Rubber Compressor Vibration Isolators.
|
|
|
| |
|
Crown Victoria Suspension Air spring solenoid includes new o-rings. This Also Fits the Crown Victoria LIMO
|
 |
|
| |
Ford Crown Victoria 1989-2008 Suspension O-RING KIT
|
Crown Victoria Suspension o-rings for 2 solenoids 8 total.
|
|
|
.jpg)
